A chainsaw is a very useful tool to help you cut wood. In fact, one of the primary reasons why people chainsaw is because they wish to cut tree branches down off of a tree. At some point a branch may become too long, or inclement weather may cause a branch to get damaged or sag. Because of this you may need to cut down a branch or two to improve the look or safety of your tree. Obviously, the chainsaw is the perfect tool to use to accomplish this task.
The problem is that many feel unsafe or unsure of themselves to be able to use the chainsaw for this task. They are concerned that they may make a mistake that could lead to injury, either to themselves or to someone else. There is also the concern that by cutting down a branch or even the entire tree itself that greater injury could occur when the tree falls. We have all seen the videos were a person cut their tree in the tree then collapsed on their home. There is certainly a trick to cutting down a tree and here are some steps that can help you to be able to do this.
Your first step is to make sure that you cut a notch in the tree itself about halfway through its trunk. The notch should be on the side of the tree where you want the tree to fall itself. This is a very common mistake that people make. They begin on the wrong side, thus the tree falls the wrong way than what they desired. This is when real damage occurs.
To ensure that the tree falls the direction that you want, it is a very smart idea to tie a rope to the top of the tree. The other end of the rope should be tied down on the side that you want the tree to fall. This helps to ensure that no mistake can occur.
The cut that you make originally should actually be in a notch. What this means is that you should cut a section out that’s about 1 inch high from top to bottom. This notch should go about halfway into the tree.
Your next step is to go to the other side of the tree and begin to cut at an angle down towards the notch. You should cut at about a 30° angle starting above the notch on the other side of the tree, at least eight or nine inches above the notch. As you approach the notch you will notice that the tree will begin to lean towards the side that you want the tree to fall. If you see that the tree is starting to lean towards you then you should be aware that you have been doing something wrong. This is a time that you should be extremely thankful that you tied your rope on the top of the tree.
If you have done this right you will notice that the tree will begin to lean the direction you wanted to go, and the more that you continue to cut towards that notch the further it should lean. Eventually, the force of gravity will cause that tree to fall over in the direction that you desired. You have successfully cut down the tree now.
Hopefully, you have been smart enough to ensure that nothing was in the way of the tree as it fell. This is one of those mistakes that people make as well. They don’t judge properly how tall the tree is so things get damaged because they are in the pathway of the following timber. If you believe that your tree is 10 feet tall let’s say then you should provide at least twice that distance to ensure nothing gets damaged.
Once you are done, to dispose of the tree what you want to do is to cut off each of the branches first and remove them away from the area. This can be done with your chainsaw as well. From there, cut the trunk into several pieces that are manageable enough for you to pick up and move somewhere else. Now you are all done.
>>>>>Click to view best chainsaw reviews<<<<